PPS (Pay Per Share) - When using PPS, the miner receives a reward for each accepted share by the pool, regardless of the finding of blocks by the pool. In this case, the pool determines the cost of each share independently based on the network complexity, network reward, block time and the pool's own power.
Payments on the BTC pool are made once a day between 15:00-20:00 (UTC). The balance must be above the payout threshold at the time of the payout itself, and the payout address must be confirmed.
There are no commissions on the pool for withdrawing funds to your wallet address. The entire balance is transferred to you.
0.001 on bitcoin
We recommend setting 3 URL stratums to ensure stable and sustainable mining. If one of them is inactive, the miner will sequentially switch to the next one.
The hashrate shown in the mining pool is lower than the hashrate of the local miner might be due to many factors. The common reasons are as follows.
1. The average hashrate of the mining machine is calculated differently from that of the mining pool.
2. The firmware version of mining machine is too low, resulting in incompatibility and low hashrate.
3. Network latency
4. Rejection rate and the hardware settings
You can set Telegram alert notification after send message to PECPool telegram bot (@pecpoolbot), and receive alerts on hashrate fluctuations and miners' decline through Telegram, when the hashrate alert threshold is triggered.
Based on the principles of Cloud Mining, miners continuously accept work tasks from the mining pool and return the hash results. However, there is a delay in communications between the miner and the mining pool network. The rate of invalid submissions due to network delay is known as the Rejection Rate.
1. When setting miners, you might have made mistakes in the configuration of mining stratum URL/worker ID/password/mining software, etc. Please check the settings of inactive workers first and contact the customer manager for assistance when in need.
2. The working time is short, and the miner has not yet submitted data to the mining pool. You can observe this situation for 10-20 minutes depending on the hashrate.
3. The network connection of your mining machine is unstable or lost or the Mining machine idling.
The mining yield is affected by some factors below.
1. Hashrate fluctuation
2. Difficulty adjustment
3. Halving event
4. Payment method
Copyright ©2025 PECPool.